Requirements for coatings used on wood surfaces


(1). Purpose of wood surface coating: 1. Beautify the surface-enhance the three-dimensional sense of wood texture and the touch of the surface while imparting color, luster and smoothness; 2. 2. Material protection-moisture resistance, water resistance, oil resistance, chemical resistance, insect resistance, corrosion resistance, moth resistance, etc.; 3. Special functions-temperature indication, electrical insulation, sound insulation, heat insulation, etc.
 
(2). Requirements for coating on the surface of wood There are two main difficulties in coating the surface of wood: 1. Porosity of water materials: The pore area on the surface of wood accounts for about 40% of the surface area on average, less than 30%, and as many as 80%. Therefore, the wettability and adhesion of wood water materials is a big problem in wood coating; 2. The hydrophilic expansion and contraction of wood, the wood swells when exposed to water, dehydration and shrinks, all causing the coating film to crack and fall off, so the long-lasting stability of the coating film is another major problem in wood coating; in addition, some wood contains acid and grease Similar substances, easy to seep out of the surface. In addition, the softness and hardness of wood texture/material structure/uniformity of surface hue are also difficulties in wood coating because of the characteristics of wood itself and the difficulties in coating. The characteristics of the wood coating and the special coating system
 
(3). Wood coating requirements for coatings: 1. Because the wood furnishing is a multi-layer supporting system, the primer is required to have good permeability, wettability and superior adhesion to the wood. The layer should also have good adhesion between layers to form a whole. 2. The coating must have a good strain force to ensure the durability of the coating; 3. The coating should have good decorative properties to ensure the clarity of the wood grain and the obvious three-dimensional effect; 4. The coating should have good mechanical properties, water resistance, chemical resistance, and pollution resistance; The coating film has high hardness, strong friction resistance and good hand feeling; 6. The coating should have good workability, recoatability, and can be changed according to the requirements of use.