Water-resistant and weather-resistant plank glue

 First, product features:

   234For the water-based latex main agent, before use need to add bridging agent mixed use, for a practical high-strength first-class weather (JapanJIS 6806 Type I, GermanyD4Grade) is a two-liquid splicing glue developed especially for matching the wheel-type circulating splicing machine to improve the mass production of high-grade solid wood (such as white oak, red oak, rubber wood, oak wood, birch, pine, fir, juniper) and other splicing in furniture factories. The cold pressing time of high-solid components is short.This product has water resistance, heat resistance, solvent resistance, and does not contain any formalin, so the output of wood glued products can pass through Europe.E0Level and Day

BenFcoClass,JAIA F☆ ☆ ☆ (JapanF4Star) no free formaldehyde release the latest environmental protection specifications.

II. Purpose:

1, woodworking furniture wood materials followed by: such as seat panels, desktop panels, stair handrails, bed posts, eight-foot posts, etc.

2Oil pressure type four-sided fast plate splicing machine, wood moisture content6-10%, the temperature25℃, cold pressed1Loop only30-40Points.

Nature of 3.

4. method of use:

1Rubber blending weight ratio#234：C15=100：15.

2The processing precision is glued to the processing surface, and no saw marks and wave planer marks can be seen. The surface shall be smooth and rough. Only ±0.1mmWithin. perpendicularity error1Within degrees.

3Moisture content optimum moisture content of wood patchwork6-10%. (up14%within, to match the equilibrium moisture content of the sales area).

4Adhesive quantity250-300g/㎡. Immediately after the cloth is glued, avoid placing it in the air to form a dry film, and a higher amount of cloth glue is required in summer.

5Group time Closed group6-8minutes (25℃) complete the pressurization operation.35℃3-5Complete the pressurization operation within minutes.

62. Cold pressure and pressurization time30Minutes-1More than hours (25C). High moisture content and low temperature10℃, should be extended double cold pressing time. Winter temperatures below5Temperature below must be equipped with heating equipment. After decompression, place the next day the most suitable mechanical planing processing.

7Pressurized pressure cork6-10kg/cm2. Hardwood10-15kg/cm2

8, available time25℃1Hours.10℃2.5Hours,Summer35℃40Minutes.usable time1Hours,It is best to deploy only in40Amount of glue used in minutes,Not too much,Refill the newly prepared glue at any time.(Glue that cannot be used up due to exceeding the active period,Will greatly reduce the adhesive force,And the viscosity increases greatly,Not easy to brush),This ensures the quality of the glue..

9Adhesive force test accordingJIS K6806 25When the temperature is more than three days, the maximum bond shear strength is reached..

10Period of preservation25℃6months, up to a year. Please keep in a cool place, and avoid high heat, sun, do not freeze. Sealing storage period of bridging agent20℃1year,30When it is half a year, it will be used up as soon as possible after opening.

11Pay attention to the fact that water naturally evaporates to the upper layer and then condenses on the surface of the glue when it is stored for a long time. If there is separation, it can still be used by stirring at high speed up and down. Main agent before use, first stir evenly, bridging agent to avoid moisture absorption or rain, two full mixed evenly, to ensure quality.

Important statements:Our recommendations for the use of this product,Based on tests we believe to be reliable.We are very concerned about the selection of materials and the manufacturing process.Therefore, these data do not exempt the consignee from the responsibility of testing..About this product and its use,and suitability for special purposes,We make no warranty, representation or implication. The Company shall not be liable for any consequence, accident or any loss caused.

National Service Hotline:4006-588-178                                           4008-858-178           

Telephone (WIRE）：0769-85619128                                  Fax (FAX）：0769-85600122

Keywords: hardwood plywood glue environmental protection plywood solid wood plywood glue